Marine Sea Water Reverse Osmosis Systems Seawater Fresh Water Generator

• Certification: ISO9001, CE, SGS
• Salt Rejection Rate: 99.0%
• Application: Industry
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HYRO 1000L to 50m3/hr
• Capacity: 10m3 to 50m3/Hr
• Seawater TDS: 35000ppm-50000ppm
• Fresh Water: Less Than 700ppm
• Untreaed Water: for Drinking or Irrigation
• Used in: Boat Sailboat Vessel
• Machine Name: Water Desalination Machine
• Name: Desalination Machine
• Transport Package: Seaworth
• Specification: L1.1XW1.2XH1.6
• Trademark: JISHUI
• Origin: Guangdong, China
• HS Code: 842121
• Production Capacity: 500
• Package Size: 100.00cm * 80.00cm * 165.00cm
• Package Gross Weight: 600.000kg

Product Description

Marine Sea Water Reverse Osmosis Systems  Seawater Fresh Water Generator

 

Product Description

 

<1>Product Description

With world leading "Reverse Osmosis Membrane technology", the improved design seawater desalination equipment efficiently convert seawater into ultra clean and clear drinking water free from odors and bacteria. 
The converted water meets the national drinking water quality standard .

Features
1) The most advanced RO system and membrane component.
2) Efficient energy recovery technology.
3) Adoption of high-quality safety pressure relief device & observation system.
4) Stable operation & high-quality producing water.

 

Please Attention
All the source water quality  is not always the same. This is a short comparison between samples:
Item	source water(Saltness)	Simple TDS(Total disolved solid) range
1	Tap water: 0.1-7mg/l	TDS range: 100ppm to 700ppm
2	Brackish/River water:0,7 to 10 g/l	TDS range: 700ppm to 10000ppm
3	Northern Sea close to estuaries :21 g/l	TDS range: 10000ppm to 21000ppm
4	Atlantic Ocean :35 g/l	TDS 35000ppm
5	Mediterranean Sea :38 g/l	TDS 38000ppm
5	Arabian Sea :45 g/l	TDS45000ppm
6	Red sea:  41g/L	TDS 41000ppm
7	Dead Sea :300 g/l.	TDS 300,000ppm
Mark: Pls adivse your source water TDS,Iron, Manganese, Bacterials and etc. It is better make a water test report. so that design the ideal propsal.

SWRO Process steps introduction

Pre-treatment	Feed water pump, Stainless steel 316L	Provide pressure for filters;
	Quartz sand filter	Remove suspended particle and large impurity. In this system;
	Active Carbon Filter (option)	Remove the color, free chloride, organic matter, harmful matter, ect;
	Anti-scalant system	To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking)
	Manual/Auto control valves	Flushing sand/carbon filter after some time
	5micron  filter	Remove larger than 5 micro colloids in the water. In this system
	1micron filter	Remove larger than 1 micro colloids in the water. In this system
Seawater RO Main Part	High pressure pump, Stainless steel 316L	Provide the high pressure to RO membrane;
	Ro membranes	More than 98% desalination rate, can remove ions except H2O.
	CIP system	To washing the membranes when it is blocked after using for long time
	Electronic control panel	PC controller or PLC and HMI  controller

SWRO process flow chart:



 

Product Parameters

Base parameter

Raw water
TDS	<=40000mg/L
Inlet Temperature	5~45ºC
Inlet Flow	0.56m^3/h

 

Product water
TDS	<=700mg/L(City tap water standard)
Salt Rejection rate	>=99.5%
Product Recovery rate	18%
Product Flow	100L/h
Operating Pressure	<6.5Mpa

 

Power
Voltage	380V/50Hz/three-phase
Power	2.05 KW
Protection Levels	IP54

 

Work environment
Environment Temperature	0~45ºC
Air Humidity	20~90%

Product Specification

Marine Sea Water Reverse Osmosis Systems Fresh Water Generator
Model	HY-A-100L
Water Yield	100LPH(528GPD)
Configurations	USA DOW RO membrane / pump(Optional)
Application	Drinking Water, industrial process water treatment
Net Weight	160 KG
Dimension(L*W*H)	900*440*1500mm
Warranty	2 years

For cost analysis(Operation Cost,Operation Cost analysis of chemicals,System Supplies Cost) of this product, please contact us.

Maintenance space and Pipe Design

Servicing space	Face 1000mm, Back 700mm, The left and right side 1000mm.
High-pressure pump	Imported
Feed pump inlet size	DN25
Concentrate water outlet size	DN15
Product water outlet size	DN15

                           2000Liter/D                                                                                                    5000L/D to 10m3/D

We also can customized vary difference flow rate for user.
                                                           10M 3/D                                                                           28M3/D

Related SWRO 

Certifications

 

 

 

Company Profile

exbition

 

Case

 

Buying Guides

 

In order to make the quote best fit your demand, kindly confirm as below:

 

1- Untreated water: from well water(send water test report),seawater or other?

2- Treated water purpose:  Meet city tap water standard for humandaily use(TDS less than 500ppm) or other purposes?

3- Outpu capacity: How many liters/gallons per hour do you need?

4- Will the power supply 380v/50hz/3ph or others there?

 

I would like to introduce our company HaiYuan Water Treatment CO.,Limited.

Our advantages:

 

--We can give you what you the ideal price and quality.

- We are dedicated in water treatment since 2006

- Export experience over 100 countries, familiar with vary water quality.

- Customized water treatment solution for varied industries

- ISO9001 quality certification and CE certification & OEM service available.

 

Send us inquiry to get more info. Thanks!