| Certification: | ISO9001, CE |
|---|---|
| Salt Rejection Rate: | 98.0% |
| Application: | Industry |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Container Ro System Mobile Reverse Osmosis Water Filtration System Containerized Mobile Water Treatment Systems Unit Device Solutions Container Reverse Osmosis
Salted water is not always the same. Depending on whether they come from warm or cold oceans, closed or open seas, their salt content will vary. This is a short comparison between samples:
| Please Attention | ||
| All the source water quality is not always the same. This is a short comparison between samples: | ||
| Item | source water(Saltness) | Simple TDS(Total disolved solid) range |
| 1 | Tap water: 0.1-7mg/l | TDS range: 100ppm to 700ppm |
| 2 | Brackish/River water:0,7 to 10 g/l | TDS range: 700ppm to 10000ppm |
| 3 | Northern Sea close to estuaries :21 g/l | TDS range: 10000ppm to 21000ppm |
| 4 | Atlantic Ocean :35 g/l | TDS 35000ppm |
| 5 | Mediterranean Sea :38 g/l | TDS 38000ppm |
| 5 | Arabian Sea :45 g/l | TDS45000ppm |
| 6 | Red sea: 41g/L | TDS 41000ppm |
| 7 | Dead Sea :300 g/l. | TDS 300,000ppm |
| Mark: Pls adivse your source water TDS,Iron, Manganese, Bacterials and etc. It is better make a water test report. so that design the ideal propsal. |
||
| HY-RO-6T/hr container reverse osmosis | |||
| Flow rate | 144T/day | Recovery rate | 60% |
| Applicable power | 380V/50hz 3 phase | Rated power | 9.9KW |
| Feedwater TDS | 2800ppm | freshwater TDS | 31.6ppm |
| high pressure | 17.3bar | operating temperature | 5-45ºC |
| Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
| Feedwater turbidity | <1NTU | Feedwater PH value | / |
| RO membrane housing | 8040*3 core 2pcs | RO membrane | 6pcs |
| Variable-frequency Drive | For each pump | Container | 20FT |
|
|
| HY-SCRO-3000L/hr (20m3/D)solar container reverse osmosis | |||
| Flow rate | 20m3/day | Recovery rate | 0.69 |
| Applicable power | 380V/50HZ 3 phase | Rated power | 7.5KW |
| Solar powered | 20KW | Inverter | 20KW (25KVA) |
| Solar panel | 20 pcs | Battery | 8PCS, 24KW |
| Incoming TDS | 2710ppm | output water TDS | 50ppm |
| Working pressure | 18 bar | operating temperature | 5-45ºC |
| Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
| Feedwater turbidity | <1NTU | Feedwater PH value | 6.5-7 |
| RO membrane housing | 4040 x 2 cores 6pcs | RO membrane | 12piece |
| Variable-frequency Drive | For each pump | Container | 20FT |
RO Process steps introduction
| Pre-treatment | Feed water pump, Stainless steel 316L | Provide pressure for filters; |
| Quartz sand filter | Remove suspended particle and large impurity. In this system; | |
| Active Carbon Filter (option) | Remove the color, free chloride, organic matter, harmful matter, ect; | |
| Anti-scalant system | To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking) | |
| Manual/Auto control valves | Flushing sand/carbon filter after some time | |
| 5micron filter | Remove larger than 5 micro colloids in the water. In this system | |
| 1micron filter | Remove larger than 1 micro colloids in the water. In this system | |
| water RO Main Part | High pressure pump, Stainless steel 316L | Provide the high pressure to RO membrane; |
| Ro membranes | More than 98% desalination rate, can remove ions except H2O. | |
| CIP system | To washing the membranes when it is blocked after using for long time | |
| Electronic control panel | PC controller or PLC and HMI controller |
RO process flow chart:
Containerized Reverse osmosis plant
| HY-SWRO-8~9m3/hr(200m3/D) ro seawater desalination plant | |||
| Flow rate | 160T/day | Recovery rate | 45% |
| Applicable power | 380V/50HZ 3 phase | Rated power | 53KW |
| Feedwater TDS | <45000ppm | freshwater TDS | <600ppm |
| Working pressure | <6Mpa | operating temperature | 5-45ºC |
| Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
| Feedwater turbidity | <1NTU | Feedwater PH value | PH 3-10 |
| RO membrane housing | 8040-5 core,3piece | RO membrane | 15 piece |
| Equipment specification | 7.5X1.2X1.65(m) L*W*H | Net weight | 2500Kg |
| Packing specification(Plywood) | 7.5X1.2X1.65(m) L*W*H | Gross weight | 2800Kg |
Related SWRO
| Below is 20GP container capacity paramete | |||||
| Model | Membrane model*qty | Capacity m3/D | Weight/kg | Operating Pressure/Mpa | Power |
| HYSW-20GP-20 | 4040×8 | 20 | 2800 | 4.0-6.5 | 220V-440V/ 50Hz-60Hz |
| HYSW-20GP-26 | 4040×10 | 26 | 2860 | 4.0-6.5 | |
| HYSW-20GP-30 | 4040×12 | 30 | 2920 | 4.0-6.5 | |
| HYSW-20GP-40 | 4040×16 | 40 | 3030 | 4.0-6.5 | |
| 20GP Container-frame: 20 ft according to ISO- standard (5.85x2.23x2.15 meter). |
|||||
| ·suit for long-distance transport ·easy installation ·save space for customers More detail need customized according user requirement. |
|||||
(option) Solar powered seawater desaliantion plants
Containerized RO plant
Mobile Water treatment plant
){kind=link}