Certification: | ISO9001, CE |
---|---|
Salt Rejection Rate: | 98.0% |
Application: | Industry |
Still deciding? Get samples of US$ 4000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Not all salted water is the same. The salt content of water can vary depending on various factors such as the origin of the water. Here is a brief comparison of salted water samples:
Water from warm oceans tends to have a different salt content compared to water from cold oceans. The temperature of the ocean affects the salt concentration, resulting in variations in the taste and properties of the salted water.
Salted water from closed seas and open seas also differs in terms of salt content. Closed seas, such as the Dead Sea, have higher salt concentrations due to evaporation and limited water exchange. On the other hand, salted water from open seas may have lower salt concentrations due to constant water flow and mixing.
At Dongguan Haiyuan Water Treatment Co., Ltd., we understand the importance of knowing the differences in salt content in various salted water sources. Our expertise in water treatment ensures that we provide high-quality salted water, carefully sourced and treated to meet your specific needs.
Please Attention | ||
All the source water quality is not always the same. This is a short comparison between samples: | ||
Item | source water(Saltness) | Simple TDS(Total disolved solid) range |
1 | Tap water: 0.1-7mg/l | TDS range: 100ppm to 700ppm |
2 | Brackish/River water:0,7 to 10 g/l | TDS range: 700ppm to 10000ppm |
3 | Northern Sea close to estuaries :21 g/l | TDS range: 10000ppm to 21000ppm |
4 | Atlantic Ocean :35 g/l | TDS 35000ppm |
5 | Mediterranean Sea :38 g/l | TDS 38000ppm |
5 | Arabian Sea :45 g/l | TDS45000ppm |
6 | Red sea: 41g/L | TDS 41000ppm |
7 | Dead Sea :300 g/l. | TDS 300,000ppm |
Mark: Pls adivse your source water TDS,Iron, Manganese, Bacterials and etc. It is better make a water test report. so that design the ideal propsal. |
Pre-treatment | Feed water pump, Stainless steel 316L | Provide pressure for filters; |
Quartz sand filter | Remove suspended particle and large impurity. In this system; | |
Active Carbon Filter (option) | Remove the color, free chloride, organic matter, harmful matter, ect; | |
Anti-scalant system | To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking) | |
Manual/Auto control valves | Flushing sand/carbon filter after some time | |
5micron filter | Remove larger than 5 micro colloids in the water. In this system | |
1micron filter | Remove larger than 1 micro colloids in the water. In this system | |
Seawater RO Main Part | High pressure pump, Stainless steel 316L | Provide the high pressure to RO membrane; |
Ro membranes | More than 98% desalination rate, can remove ions except H2O. | |
CIP system | To washing the membranes when it is blocked after using for long time | |
Electronic control panel | PC controller or PLC and HMI controller |
10m3-20m3/Day Seawater Desalination Plant
Introducing the RO Water Treatment Plant for Sea Salt Water Treatment by Dongguan Haiyuan Water Treatment Co., Ltd. This small water treatment plant utilizes reverse osmosis technology to provide drinking water treatment and saltwater treatment. It is a containerized desalination plant that offers a cost-effective and efficient solution for seawater treatment. Perfect for both commercial and residential use, this RO plant for seawater purification is a reliable and high-quality water treatment facility. Experience the benefits of clean and fresh drinking water with this advanced RO water plant.
Discover our RO Water Treatment Plant for Sea Salt Water Treatment. Our containerized desalination plant utilizes reverse osmosis technology to provide a cost-effective solution for seawater purification. With a focus on efficiency and quality, our plant ensures the production of clean drinking water from saltwater sources.
HY-SWRO-8~9m3/hr(200m3/D) ro seawater desalination plant | |||
Flow rate | 160T/day | Recovery rate | 45% |
Applicable power | 380V/50HZ 3 phase | Rated power | 53KW |
Feedwater TDS | <45000ppm | freshwater TDS | <600ppm |
Working pressure | <6Mpa | operating temperature | 5-45ºC |
Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
Feedwater turbidity | <1NTU | Feedwater PH value | PH 3-10 |
RO membrane housing | 8040-5 core,3piece | RO membrane | 15 piece |
Equipment specification | 7.5X1.2X1.65(m) L*W*H | Net weight | 2500Kg |
Packing specification(Plywood) | 7.5X1.2X1.65(m) L*W*H | Gross weight | 2800Kg |
Related SWRO
Below is 20GP container capacity paramete | |||||
Model | Membrane model*qty | Capacity m3/D | Weight/kg | Operating Pressure/Mpa | Power |
HYSW-20GP-20 | 4040×8 | 20 | 2800 | 4.0-6.5 | 220V-440V/ 50Hz-60Hz |
HYSW-20GP-26 | 4040×10 | 26 | 2860 | 4.0-6.5 | |
HYSW-20GP-30 | 4040×12 | 30 | 2920 | 4.0-6.5 | |
HYSW-20GP-40 | 4040×16 | 40 | 3030 | 4.0-6.5 | |
20GP Container-frame: 20 ft according to ISO- standard (5.85x2.23x2.15 meter). |
|||||
·suit for long-distance transport ·easy installation ·save space for customers More detail need customized according user requirement. |
In order to provide you with the best quote that suits your needs, please confirm the following:
At Dongguan Haiyuan Water Treatment Co., Ltd., we take pride in offering you the ideal price and quality for your water treatment needs. With over 15 years of experience in the industry, we have exported our products to more than 100 countries and are familiar with various water quality requirements.
We specialize in providing customized water treatment solutions for a wide range of industries. Our commitment to quality is reflected in our ISO9001 certification and CE certification. Additionally, we offer OEM service to meet your specific requirements.
For more information, please send us an inquiry and we will be happy to assist you. Contact us now to get your customized desalination plant.
Thank you,
Sherry Wei