Seawater Sea Water Salt Water Marine Desalinator Watermaker Desalinator Dessalator Watermaker

• Certification: ISO9001, CE, SGS
• Salt Rejection Rate: 99.0%
• Application: Industry
• Model NO.: HYRO 1000L to 50m3/hr
• Capacity: 10m3 to 50m3/Hr
• Seawater TDS: 35000ppm-50000ppm
• Fresh Water: Less Than 700ppm
• Untreaed Water: for Drinking or Irrigation
• Used in: Boat Sailboat Vessel
• Machine Name: Water Desalination Machine
• Name: Desalination Machine
• Transport Package: Seaworth
• Specification: L1.1XW1.2XH1.6
• Trademark: JISHUI
• Origin: Guangdong, China
• HS Code: 842121
• Production Capacity: 500
• Package Size: 1100.00cm * 1000.00cm * 1650.00cm
• Package Gross Weight: 400.000kg

Product Description

Seawater  Sea Water Salt Water Marine Desalinator Watermaker Desalinator
 

 

Product Description

 

<1>Product Description

The seawater desalination equipment adopts the international advanced reverse osmosis technology and is designed by optimizing the system.

The system can effectively remove inorganic salts, heavy metal ions, organic bacteria, bacteria and other harmful components in seawater, and desalinate seawater into high-quality water in accordance with the National drinking Water Sanitation Standard (GB5749-2006).

Features
1) The most advanced RO system and membrane component.
2) Efficient energy recovery technology.
3) Adoption of high-quality safety pressure relief device & observation system.
4) Stable operation & high-quality producing water.

 

Please Attention
All the source water quality  is not always the same. This is a short comparison between samples:
Item	source water(Saltness)	Simple TDS(Total disolved solid) range
1	Tap water: 0.1-7mg/l	TDS range: 100ppm to 700ppm
2	Brackish/River water:0,7 to 10 g/l	TDS range: 700ppm to 10000ppm
3	Northern Sea close to estuaries :21 g/l	TDS range: 10000ppm to 21000ppm
4	Atlantic Ocean :35 g/l	TDS 35000ppm
5	Mediterranean Sea :38 g/l	TDS 38000ppm
5	Arabian Sea :45 g/l	TDS45000ppm
6	Red sea:  41g/L	TDS 41000ppm
7	Dead Sea :300 g/l.	TDS 300,000ppm
Mark: Pls adivse your source water TDS,Iron, Manganese, Bacterials and etc. It is better make a water test report. so that design the ideal propsal.

SWRO Process steps introduction

Pre-treatment	Feed water pump, Stainless steel 316L	Provide pressure for filters;
	Quartz sand filter	Remove suspended particle and large impurity. In this system;
	Active Carbon Filter (option)	Remove the color, free chloride, organic matter, harmful matter, ect;
	Anti-scalant system	To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking)
	Manual/Auto control valves	Flushing sand/carbon filter after some time
	5micron  filter	Remove larger than 5 micro colloids in the water. In this system
	1micron filter	Remove larger than 1 micro colloids in the water. In this system
Seawater RO Main Part	High pressure pump, Stainless steel 316L	Provide the high pressure to RO membrane;
	Ro membranes	More than 98% desalination rate, can remove ions except H2O.
	CIP system	To washing the membranes when it is blocked after using for long time
	Electronic control panel	PC controller or PLC and HMI  controller

SWRO process flow chart:



 

Product Parameters

Base parameter 

Product Parameters
Water yield	500 litres per hour
RO product water quality	National Standard for Drinking Water(GB5749-2006)
Desalination rate	>99.5%
Output water saltness	<700mg/L
Recovery rate	28%(Depending on temperature and inlet water quality)
Operation pressure	<6.5Mpa
Power	3.75KW
Voltage	AC380V / 50Hz / Three phase
Protection grade	IP54
Dimensions	1200*1100*100 mm
Net weight	4000Kg
Material composition	SUS316 Stainless steel

 

 

 

Main accessories

1. Reverse Osmosis Membrane: 4040, 2pcs
2. Membrane Housing: 1000PSI, 1 Core, FRP, 2pcs
3. Multimedia Filter: Ø400x1600mm, FRP, 1pcs
4. Precision Filter: 20" x 5μm, FRP
5. High Pressure Pump: SUS316, Imported brand
6. Feed Pump: SUS316
7. Rinse Tank: System matching

8. CIP Chemical Cleaning Device: System matching
9. Conductivity Meter: Domestic brand
10. Electric Element: International famous brand

 

* 1. The amount of water produced refers to the amount of water produced under the conditions of an inlet water temperature of 25 ºC, a salt content of 35,000 mg/L, and an operating pressure of 5 MPa.
   2. Equipment can be customized according to customer requirements.

System function
1. High-pressure unloading, when the high-pressure pump outlet pressure exceeds 6.2MPa, the equipment automatically stops and protects and emits an audible and visual alarm.

2. Low-pressure shutdown protection. When the pre-treatment water supply is insufficient and the high-pressure pump inlet pressure is lower than 0.05MPa, the protection action will be automatically stopped and an audible and visual alarm will be issued.

3. The pre-treatment is equipped with a manual multi-way valve for large-flow backwashing and full washing.

4. Configure the reverse osmosis membrane cleaning system to physically clean, chemically clean and refill the reverse osmosis membrane module

 

For cost analysis(Operation Cost,Operation Cost analysis of chemicals,System Supplies Cost) of this product, please contact us.

Maintenance space and Pipe Design

Servicing space	Face 1000mm, Back 700mm, The left and right side 1000mm.
High-pressure pump	Imported
Feed pump inlet size	DN25
Concentrate water outlet size	DN15
Product water outlet size	DN15

                           2000Liter/D                                                                                                    5000L/D to 10m3/D

We also can customized vary difference flow rate for user.
                                                           10M 3/D                                                                           28M3/D

Related SWRO 



 

Certifications

 

 

 

Company Profile

exbition

 

FAQ

1)Q: Are you a factory or trading company?
    

Haiyuan are professional assembly, production, commissioning  water treatment system for 13 years. With CE, SGS, ISO certification. The Quality and Service as our culture.

We do business with North America, Sourth America, ,The Middle East, Southeast Asia business ,very familiar with  different water quality process.

HY water treatment supply:

River, pond, stream, canal, sea, lake (Any available surface water and well include any sub surface water source) with TDS value (Max  50000 ppm).

Marin business scope:

Containerizedc RO water treatment plant/system

Seawater desalination plant 

Solar powered water desalination plant/system

Deionized(DI) water plant/ion exchange        

Demineralized Water Treatment Plant/DM plant

Iron/manganese removal system from well water

Water softener system/Ion exchange system

Ultra Filtration System 

 

Buying Guides

 

In order to make the quote best fit your demand, kindly confirm as below:

 

1- Untreated water: from well water(send water test report),seawater or other?

2- Treated water purpose:  Meet city tap water standard for humandaily use(TDS less than 500ppm) or other purposes?

3- Outpu capacity: How many liters/gallons per hour do you need?

4- Will the power supply 380v/50hz/3ph or others there?

 

I would like to introduce our company HaiYuan Water Treatment CO.,Limited.

Our advantages:

 

--We can give you what you the ideal price and quality.

- We are dedicated in water treatment since 2006

- Export experience over 100 countries, familiar with vary water quality.

- Customized water treatment solution for varied industries

- ISO9001 quality certification and CE certification & OEM service available.

 

Send us inquiry to get more info. Thanks!